Dongxin Melamine (Xiamen) Chemical Co., Ltd.

Use the raw material box to weigh the raw material according to the tableware gram to be produced, put it into the high sound wave, preheat it evenly, and then the powdery material is heated into blocks. The preheated lump material is poured into the mold, and the mechanical flat processing is started high temperature, high pressure, solidification molding.

According to the shape of the flower paper, stick to the flat tableware as required. The decal should be placed vertically, in the right direction,to look beautiful and generous. After the flowers are affixed, the mechanical printing process begins.

After decal, the surface of the product should be evenly coated with polishing powder. Otherwise it will affect the color of the product, of course not can apply too much. After high temperature and high pressure curing, the surface of the product is as bright as porcelain.

The product must be polished after production, because the edge of the product is rough, which is not conducive to people's lives, easy injury to the hands and mouth; So polishing is essential.

When polishing operation, enter the inspection link, strictly check the quality inspection. Should set up the initial inspection and reinspection, eliminate unqualified products, and then into the warehouse packaging.